Wi fi repeater router

There are two types of wifi repeater.

⑴ Socket-type wifi repeater description:

Color: White
Plug Type: EU Plug
Frequency Range: 2.4-2.4835GHz
Networking Cable Length: Approx.1m
Operating Temperature: 0 degree~40 degree
Storage Temperature: -40 degree~70 degree
Dimension: Approx.8.0(L) x 5.0(W) x 9.3(H)cm
Relative Humidity: 10% ~ 90% (Non Condensation)
System Requirement:
WLAN access point/client according to IEEE 802.11n, g, b
110 ~ 230-volt socket
The WLAN client must support at least the WPA encryption standard
WLAN access point and the WLAN client with automatic IP address assignment(DHCP)
Forwarding of IPv4-based protocols/Address Resolution Protocol
The network name (SSID) of the WLAN access point must be set to \”visible\”
Note:
Make sure the Repeater is placed in a location where it can receive a strong signal from your desired wireless Internet connection. The Repeater will not work without a signal that it can repeat

The wireless signal rate based on IEEE standard of 802.11b, g, n chipset used. Actual throughput may vary. Network conditions and environmental factors lower actual throughput rate. All specifications are subject to change without notice.

Package Content:
1 x WiFi Repeater (Without retailing packing)
1 x RJ45 Cable
1 x Users’ Manual

⑵ USB-type wifi repeater description:

1. Enlarge the family WIFI, the network expansion to achieve full coverage of the home network,
Room network no dead ends, so smart and convenient everywhere!
2. Widely compatible with the mainstream of the router brand, easy to use and easy to operate
3.USB interface power supply, support multi-mode power supply, such as: charge Po, computer, USB socket
4.300M signal expansion, to ensure strong signal stability, covering a wider range
5.WIFI effect to achieve through the wall, the phone signal to enhance the effect of more than two
6. Easy to use and easy to use

Type: Wireless Routing Repeater
Operating voltage: 5V
Interface type: USB interface
Operating temperature: -30 degrees -80 degrees
Transmission frequency band: 2.4 GHZ band
Transmission rate: 300M
Coverage: 150 square meters
RF characteristics: IEEE802.11b
Network protocol: TCP / IP protocol
Product Size: 66 * 31 * 10mm
Product weight: 13.95G

How to use:

Connect the device to the USB interface, the phone / computer to open the WIFI function, search the WF8300 device, click the connection is successful, open the web browser input address 10.10.10.1, enter the main interface, select the drop down button to select the router to be expanded, To extend the router’s password, click Save to complete. After the success of the extension WIFI name for the original router name + PLUS, password unchanged.
Frequently Asked Questions:
Indicator does not light: This device is suitable for 5V 5V output power supply, please check the power supply and interface is good contact
Can not search the device: Please check the power and light is normal, if normal, long press the 5 second reset button to restore the factory settings
Internet speed: Please ensure that the distance between the device and the original router should not be too far, through the device signal strength indicator, generally 2 cells is appropriate.
Tips: After the expansion of the device will automatically save the original wireless router name and password, if you need to expand other wireless router, you need to restore the factory settings.

Packing List: USB Wireless WIFI Signal Amplifier: X1
Manual: X1